Analog Osiloskop Protek 6504C

Analog Osiloskop Protek 6504C Features • Small, Light Weight Portable 20MHz Oscilloscope • High Sensitivity ( 1mV/ div) and 2Channel, Dual Trace 6 inch Internal Grid • ALT MAG : Simultaneous Sweep waveform, x1 and x10( x5) • ALT TRIG : Synchronization between two different signals • TV Sync. : Stable TV signal observation • AUTO Focus : Auto-correction of focus diversion Spesifikasi - Analog Osiloskop Protek 6504C CRT • Acceleration Voltage : 12KV • Valid Area : 6 inch ( 8 x 10 div) ( div ~ 10mm) Vertical Deflection * CH1, CH2 Sensitivity • 5mV/ div~ 5V/ div ( 1-2-5 STEP, 10RANGE) ( ± 3% ) • 1mV/ div~ 1V/ div ( x5MAG) ± 5% * Input Coupling: AC-GND-DC * Bandwidth • DC : DC ~ 40MHz • AC : 10Hz ~ 40MHz * Elevation Time: About 8.7ns * Input Impedance: 1MKOhm± 2% , 25pF± 3pF * Maximum Input Voltage • 400V( DC+ AC peak) • CH1 : Operate Channel 1 Only • CH2 : Operate Channel 2 Only • ADD : addition of two signals ( CH1+ CH2) • DUAL : CHANNEL1, 2 Simultaneous Operation * Overshoot: Under 50% Horizontal Deflection * Sweep Mode: A, XY, ALT, MAG, x10 MAG * Sweep Time: • 0.1µ s/ div ~ 0.2 sec/ div ± 3% • 1-2-5 STEP( x1) , 20 RANGE * Sweep Expansion: • 0.1µ s/ div ~ 0.2s/ div( x10MAG) ± 5% • 0.1µ s/ div UNCAL Triggerin Trigger ModeAUTO, NORM, TV-H, TV-V Trigger SourceINT, CH2, LINE, EXT Trigger CouplingCH2 Signal SourceCH1, CH2, LINE, EXT Sensitivity( NORM) * A) ( INT) • DC-5MHz : 0.5div. • 20~ 40MHz : 1.5div * B) ( EXT) • DC-5MHz : 200mV • 20~ 40MHz : 800mV * TV Synchronization • INT : 1 div • EXT : 1Vp-p X-Y MODE * Operation ModeWhen X-Y Operation, CH1-X axis, CH2-Y axis * Input Impedance1M Ohm± 2% 25pF * Frequency Characteristics • DC ~ 500MHz, • Phase Difference DC ~ 50KHz 3° Z axis * Input Impedance: 33K Ohm * Max. Input Voltage: 50V ( DC+ AC peak) MAX AC 1KHz * Bandwidth: DC ~ 2MHz * Input Signal: + 5V( POSITIVE INPUT) * CAL Voltage : 0.5V, Sine wave, 1KHz * Operation Voltage : AC110V, 120V, 220V, 240V ± 10% 50/ 60Hz * Dimension & Weight : 335( W) x 140( H) x375( D) mm, 7.3kg