Hioki 3285-20 Clamp-On HiTester

Hioki 3285-20 Clamp-On HiTester Hioki 3285-20 Clamp-On HiTester, 10 Kilohms Resistance, 600V AC/ DC Voltage, 2000A AC/ DC Current Hioki 3285-20 digital clamp-meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC ( alternating current) and DC ( direct current) to 2, 000A ( amperes) . The clamp has two jaws that can close around an electrical conductor up to 55mm ( 2.17 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V, and frequency to 1, 000Hz ( hertz) , and resistance to 10k© ( kilohms) . Frequency can also be measured with the clamp. The meter has push buttons to select the property to measure, and an LCD that shows the reading numerically and in a 35-segment bar graph. The display count is 3, 750 for voltage and 2, 500 for current. The peak hold function captures the highest reading of the inrush current at the startup of motors and other inductive loads. To enable readings of rapidly fluctuating current and voltage, the slow function reduces the display update rate from four times per second to once every three seconds. The record function captures the maximum, minimum, and average readings for a property. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on a single 9V 6F22 battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. This true RMS ( root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC ( International Electrotechnical Commission) safety standard 61010-031 and is rated for CAT ( category) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It has CE ( European Conformity) marking. The unit comes with a carrying case. Spesifikasi - Hioki 3285-20 Clamp-On HiTester • Maximum AC ( alternating current) input: 2, 000A • Maximum DC ( direct current) input: 2, 000A • Maximum AC voltage input: 600V • Maximum DC voltage input: 600V • Maximum frequency detected: 1, 000Hz • Maximum resistance detected: 10k© • Installation rating: CAT III, 600V • Standards met: IEC safety standard 61010-031; CE marking • Power supply: 9V 6F22 battery • Weight: 540g/ 19oz. • Dimensions ( H x W x D) : 260 x 62 x 39mm/ 10.24 x 2.44 x 1.54 inches Paket Penjualan: • Hioki 3285-20 digital clamp-meter • Test lead set • 9V 6F22 battery • Hand strap • Carrying case • Instructions